Overview:
Includes:
- 1 x LiteGear S2 LiteMat 3 LED Panel
- 1 x LiteDimmer Pro Hybrid 16A
- 1 x LitePower Supply 12V DC, 16A w/ cable
- 1 x PH3 Head Extension 12′
- 1 x LiteMat LiteMount
- 1 x LiteMat Parasquare Louver
- 1 x LiteMat PolySkirt
- 1 x LiteMat Diffuser Set, Quarter, Half, and Full Grid.
- 1 x LiteMat 3 KitBag
S2 LiteMat 4 LED Light
The LiteGear S2 LiteMat 4 is a bi-colour LED panel. It can be powered by AC.
Light at full power, 5600K. This LED panel is very light, weighing at 5.7oz. This light has the same amount of output as a 300W Fresnel Tungsten on full flood.
Rental Rates
| $120.00 | For the 1st day |
|---|---|
| $120.00 | For a Weekend |
AW recording, Apple ProRes 422 and multi-cam with Sony’s extension unit
To keep the PXW-FS7 II small, light and easily hand-holdable, Sony engineers reserved some functions for an outboard module, the XDCA-FS7 extension unit, sold separately. The unit adds significant capabilities:
- External RAW recording: To preserve the maximum in colour, contrast and resolution, the XDCA-FS7 enables RAW recording when connected to outboard recorders, sold separately. The XDCA-FS7 supports the vivid colour of 12-bit linear RAW at either 4K or 2K resolution. A single BNC cable connects the XDCA-FS7 to compatible RAW recorders including Sony’s HXR-IFR5/AXS-R5 combination and the Convergent Design® Odyssey 7Q+ equipped with the Sony FS RAW option. In addition, the Atomos® Shogun Inferno and Shogun Flame support Apple ProRes and CDNG recording from the XDCA-FS7 output. Even when you record outboard RAW, you can still record time code-synchronised Full HD on-board, a convenient proxy for offline editing
- Apple ProRes 422 recording: Sony understands that some workflows are committed to the Apple ProRes 422 codec. That’s why the XDCA-FS7 supports Apple ProRes 422 and Apple ProRes 422 HQ – 1920 x 1080 recording to an XQD™ card in the camera
- Multi-camera operation: The XDCA-FS7 also provides genlock and timecode In/Out for multi-camera shoots
Technical Info:
- Power consumption: 200W
- Mounting: 750 spigot (aka 5/8″ or baby pin)
- Power draw: 16A @ 12VDC
- 95+ CRI
- Battery run time: 1.8 hours w/ Dynacore 14.8V battery, 1.6 hours w/ Anton Bauer G190 battery @ full power, 5600K
- Colour range: 2600K – 6000K
- Dimming:1% – 100%
- Dimensions: 21 x 40 x .9″ (533 x 1016 x 23 mm)
- Weight: 5.7 oz (2.6g)
Canada Film Equipment
